Services / Lift Stations and Grinder Pumps
Lift Stations and Grinder Pumps
A grinder pump is a wastewater conveyance device. Waste from water-using household appliances flows through the home’s pipes into the grinder pump’s holding tank. Once the wastewater inside the tank reaches a specific level, the pump will turn on, grind the waste into a fine slurry, and pump it to the central sewer system or septic tank.
We service most grinder pumps, basins, and control panel types.
Grinder Pump Maintenance
We recommend a complete grinder pump basin wash down, visual inspection, and debris removal with a visual float operation every year. Things end up in the basin that should not be there. Kids, guest, and tenants are not aware that you cannot flush whatever you want. Even cotton balls can lock up your typical grinder pump causing thousands of dollars in repairs.
Grinder Pumps
We sell and install ONLY the Liberty Omnivore series grinder pumps because they are THE BEST grinder pump available. Their design runs circles around the competition. Its external cutter does not clog like the typical grinder pump. If your pump needs replacing, this is the model that you want. It is rated at 2 hp and 200v operation.
We also offer the PRG series pumps when only 120v 20amp service is available. It is a 1 hp pump with a two inch discharge and the same external style cutter as the Omnivore. This pump can easily replace a effluent pump. Effluent pumps are not approved on most municipal type systems.
Control Panels
We carry a full line of SPI Control Panels. If you are currently using a cheap tank alert or a big box full of capacitors, consider replacing those with a user friendly panel like the one on the left. Coupled with a Liberty Omnivore its close to bullet proof.